S-LINE-200-S

Technical Specifications of S-LINE-200-S

The fixture S-LINE-200-S in silver color (unpainted aluminum housing) has a length of 20 cm. Depending on the selected LEDs, power options are available from 6 to 9 W, with a luminous flux ranging from 120 to 750 lm.

The power supply for the S-LINE-200-S fixture can be provided:

• from the 220V AC household electrical network;
• from 12V, 24V, or 36V DC.

High energy efficiency and uninterrupted operation of the S-LINE-200-S fixture throughout its service life are ensured by high-quality LEDs from reliable manufacturers, as well as optimal operating modes for the LEDs selected by our engineers. The production of the S-LINE-200-S fixture uses powerful LEDs from the American-Taiwanese manufacturer PROLIGHT and from the American manufacturer CREE, depending on the configuration.

Color Rendering Index

The S-LINE series of fixtures has several available options for the color rendering index:

• without CRI or CRI=70 using predominantly colored diodes, which predictably change the color of surrounding objects;
• CRI>70 using energy-efficient diodes from the American manufacturer CREE;
• CRI>80 using diodes from the PROLIGHT manufacturer, which accurately render the color of surrounding objects.

Color Temperature

This series of fixtures allows for the selection of color temperature:

• warm light (3000K);
• neutral light (4000K);
• daylight (5000K);
• red light;
• blue light;
• green light;
• RGB color illumination, formed by the combined operation of three types of LEDs: red (R), blue (B), and green (G).

Design of S-LINE-200-S

The aluminum housing provides good heat dissipation for the electrical components of the fixture and protects them from moisture and dust (IP65).

The materials used in the production of the S-LINE-200-S fixture are resistant to ultraviolet and atmospheric effects. This allows the fixture to be used year-round in moderate climates throughout its service life.

The S-LINE-200-S fixture can be equipped with additional optics:

• narrowly directed symmetrical optics (available options for beam angles: 5°, 10°, 15°, 30°, 45°), which create a narrow beam of light for even illumination of the facade;
• elliptical lenses that create illuminated zones of oval shape. Such a lens focuses the light beam in two perpendicular directions: for example, the beam angle of the longitudinal ray is 45°, while that of the transverse is 5°, allowing for the creation of a narrow elongated intensely illuminated zone suitable for creating a continuous line of lighting along a cornice or molding.

Installation

The S-LINE-200-S fixture is installed on the facade of the building using the included mounting brackets, which allow for adjusting the direction of the light beam during installation.

A group of fixtures can be connected to a single power point thanks to the transit cable installed in the fixture (see instructions).