W-LINE-900-S

Technical Specifications of W-LINE-900-S

The fixture W-LINE-900-S in silver color (unpainted aluminum housing) has a length of 121 cm. Depending on the selected LEDs, power options range from 6 to 24 W, with luminous flux accordingly from 650 to 2600 lm.

The power supply for the W-LINE-900-S fixture can only be provided by a constant current of 24V.

High energy efficiency and uninterrupted operation of the W-LINE-900-S fixture throughout its service life are ensured by high-quality LEDs from reliable manufacturers, as well as optimal operating modes for the LEDs selected by our engineers. The production of the W-LINE-900-S fixture uses powerful LEDs from the American-Taiwanese manufacturer PROLIGHT and from the American manufacturer CREE, depending on the configuration.

Color Rendering Index

The W-LINE series of fixtures has several available options for the color rendering index:

• without CRI or CRI=70 using predominantly colored diodes, which predictably change the color of surrounding objects;
• CRI>80 using energy-efficient diodes from the American manufacturer CREE;
• CRI>90 using diodes from the PROLIGHT manufacturer, which accurately render the color of surrounding objects.

Color Temperature

This series of fixtures allows for the selection of color temperature:

• warm light (3000K);
• neutral light (4000K);
• daylight (5000K);
• red light;
• blue light;
• green light;
• RGB color illumination, formed by the combined operation of three types of diodes: red (R), blue (B), and green (G).
• combination of R/G/B with the addition of warm, neutral, or daylight white color.

Construction of W-LINE-900-S

The aluminum housing provides good heat dissipation for the electrical components of the fixture and protects them from moisture and dust (IP65). The power supply is of internal design (included).

The materials used in the production of the W-LINE-900-S fixture are resistant to UV radiation and atmospheric effects. This allows the fixture to be used year-round in moderate climates throughout its service life.

The W-LINE-900-S fixture can be equipped with additional optics:

• narrowly focused symmetrical optics (available options for light beam angles: 5°, 10°, 15°, 30°, 45°), which creates a narrow beam of light for uniform facade illumination;
• elliptical lenses that create illuminated areas of oval shape. Such a lens focuses the light beam in two perpendicular directions: for example, the angle of the longitudinal beam is 45°, while that of the transverse beam is 5°, allowing for uniform illumination of the surface with minimal distance from the light source to the surface.

Installation

The W-LINE-900-S fixture is installed on the facade of the building using the included mounting brackets, which allow for adjusting the direction of the light beam during installation.
The brackets can move along the length of the housing and have three degrees of freedom. This allows the fixture to be mounted on uneven surfaces, round or curved columns, etc.
W-LINE-900-S can be mounted in a continuous line (with minimal gap), creating a continuous line of illuminating light.

A group of fixtures can be connected to a single power point thanks to the transit cable installed in the fixture (see instructions).