PROMLINE-300-S

Technical Specifications of PROMLINE-300-S

The fixture PROMLINE-300-S in silver color (unpainted aluminum housing) has a length of 30.6 cm. The power of the fixture is 26 W, and the luminous flux is 3600 lm.

The LED fixture PROMLINE-300-S creates high-quality and uniform lighting. It can be used in rooms with high ceilings.

High energy efficiency and uninterrupted operation of the fixture throughout its service life are ensured by high-quality LEDs from the American manufacturer CREE, as well as the optimal operating modes of the LEDs selected by our engineers.

Color Rendering Index

The PROMLINE series of fixtures has two available options for the color rendering index:

• without CRI - for premises and places without special requirements for color rendering;
• CRI>80 - to ensure good quality color rendering of surrounding objects (natural skin color, food, furniture, and other interior items).

Color Temperature

This series of fixtures allows for the selection of the color temperature of the light:

• warm light (3000K);
• neutral light (4000K);
• daylight (5000K).

Design of PROMLINE-300-S

The aluminum housing provides good heat dissipation for the electrical components of the fixture and protects them from moisture and dust (IP65). The power supply is of internal design (included).

The materials used in the production of the PROMLINE-300-S fixture are resistant to ultraviolet radiation and atmospheric effects.

The PROMLINE-300-S fixture can be equipped with optics from one of the best global lens manufacturers, LEDil:

• focusing optics of 60° or 120°, which creates a directed light beam for quality and uniform lighting of the required area, especially relevant for rooms with high ceilings;
• elliptical lenses that create illuminated zones of oval shape. Such a lens focuses the light beam in two perpendicular directions: for example, the opening angle of the longitudinal beam is 117°, while the other, transverse, is 31°, allowing for the creation of a narrow elongated intensely illuminated zone, usually needed for warehouse passages.

To enhance energy efficiency and accessibility, when using additional focusing lenses, the diffuser in the fixture may not be installed, as its functions of light distribution, dust and moisture protection, and protection against mechanical damage can be taken over by an acrylic or polycarbonate lens.

The LEDil lenses used in the production of the PROMLINE 300 fixture also perform a protective function for vision, as they reduce the brightness of the LEDs and decrease the glare effect.

Installation

The PROMLINE-300-S fixture can be mounted in a suspended manner (on a cable or stud) and surface-mounted.

It can also be installed on a pole for lighting parking lots, highways, driveways, and areas; for this, it is additionally equipped with a bracket.