For some time now, our assortment has included the RM0829EC strip with a Color Rendering Index (CRI) of 90 in three colors: 3000K, 4000K and 5000K. This strip combines many advantages, such as a large number of diodes — 600 pcs per 1 meter, a circuit board with a cutting width of 1 centimeter, which, combined with a 24 Volt voltage, provides pleasant convenience during installation and low power loss (most 120-diode, 24 Volt strips are cut every 5 centimeters), and a power consumption of 10 Watts per 1 meter. All these advantages have secured the RM0829EC strip's place in the market and will lead to a significant future increase in warehouse stock. COB strips with the possibility of cutting anywhere are also present on the Ukrainian market, but such strips have one very big drawback that outweighs all their advantages — this is their very low efficiency, at the level of 50  lumens per Watt of consumed power; whereas the RM0829EC strip has an indicator of 95 lumens per Watt. (Strip SKU: 21307, 20731, 21308).

Among the new strips from Rishang, we should also note the RD series strips, 48 Volts, 10 mm width, and 140 diodes per 1 meter - RD00E0TJ-1. These strips come in 20 meter reels with the ability to be connected from one side. This is a stabilized series that consumes 8 W per 1 meter but has no voltage drop when connecting the entire reel. Thus, the total power for 20 m will be 160 W. This allows for savings on connection wires and is more convenient when positioning the power supply. These strips will be supplied in two colors - 3000K and 4000K. These LED strips SKU are 21545 and 21546.
To simplify the installation of the strips, it is convenient to use connectors:

 




This is a power connector with a 15 cm cable, used with single-color strips of 8 mm width with SMD and COB diodes. The maximum load current is 4 A, and the cable standard is 20 AWG (0.5 mm2). It is often used when it is necessary to cut a 5 meter reel into several segments and quickly connect the power supply (SKU 20996).






This is a connector without a cable for joining LED strips, used with single-color strips of 8 mm width with SMD and COB diodes. The maximum load current is 4 A, and the cable standard is 20 AWG (0.5 mm2). It is typically used when it is necessary to join remnants (cut-offs) of strips into a single segment (SKU 20998).





This is a connector with a 15 cm cable for joining LED strips. It is used with single-color strips of 8 mm width with SMD and COB diodes, has a maximum load current of 4 A, and a cable standard of 20 AWG (0.5 mm2). It is typically used when you need to make a turn or route the strip's power supply to another plane. (SKU 21000).





This is a corner connector for joining COB LED strips, used with single-color strips of 8 mm width, with a maximum load current of 5 A. Since the connection contacts are located at the edges of the connector, joining strips with SMD diodes is impossible in this case. (SKU 21006).